e-shop Sapro Obchodný dom Bojná
Právě je 20.duben 2014 - 20:02


Pravidla fóra


Iba download, nediskutovat !



Odpovědět na téma  [ Příspěvků: 16 ] 
 Image - PGI team 
Autor Zpráva
Mírně pokročilý
Mírně pokročilý

Registrován: 04.říjen 2009 - 23:00
Příspěvky: 36
Příspěvek Re: Image - PGI team
PGI 9000 v.0.4 flash " LARVE "

Features
========
- Based on GSA 11,485
- HD channels to function smoothly, thanks to fixed second driver.
- Newcs, mgcamd-1.33, incubus and mbox are installed, but are pre-configured only newcs and mgcamd.
- News busybox stable 1.4.13 installed.
The shell commands so that all the work, and the shell has a continuous history.
Moreover, the text editor nano is still attached to the console.
- Own card drivers.
- Streaming Player sbox fixed (server part):
Works better with encrypted channels, the quality of the stream.
- Changes to shorten boot scripts at boot time
- Color keys covered with scripts to change emus (see below)
- And other minor changes ...
Changes
=============
Plugins and addons:
- Upgrade to 1.4.05 WebIF
- Upgrade Favpip-plugin to version 2.4.1
- Upgrade rss-plugin 0.0.2
- Upgrade bitrate-plugin 0.0.7
General:
- Fix: No more panic when Webif is active while the box boots
- Favpip is now by default assigned to the red button, zooms the green and yellow of the emus.
- The yellow button will start the actual emu new, rather than the durchzuwechseln list of emus
- Multi-Boot config inserted into the image, it should solve the problems if we start from zb e2 zurückflasht
- CI modules are again correctly identified, no longer need an extra fix, this time actually
- New options in boot_services.cfg
Replaced - busybox ps by ps from procps
sbox:
- Fix: after boot volume is not at 100% (now correctly saved and loaded again)
- Fix: No longer crashes during quick zap with the Abbreviated infobar
- Fix: ton supply MP3 player and Shoutcast plugin via optical output (Bitstream), even if it starts on a ton sander with ac3 (thanks to ARVY)
- Fix: No more problems if the MP3 player is executed after the shoutcast plugin.
- New feature: When you press in the EPG list the red button is called directly Plugin A IMDb
(known from favpip). One then obtains information on the selected EPG entry.
- In the Favorites list, you can with the left / right arrow key to jump between the groups (formerly known as Red and Green)
Also in the list of providers and satellite
- Edit Inquire password generally removed (Favorites, photographs ...), was just annoying
- German translation updated (thanks to byti and LaneThe2nd)
Configuration
=============
The image specific configurations are in / var / etc.
boot_services.cfg
This specifies which services are started at boot.
Services are for example samba, nfs, newcs, etc.
In addition, here are the skin and the standard set emu.
my.zooms
List of zooms are available.
Is used by the Open button.
my.ethaddr
If the box crashes or is shut down properly, then change the next time you boot the mac address
the NIC.
In this file, you can enter a fixed mac address, which is always maintained, even after crashing.
Example of the contents: 12: BB: CD
One can only represent the three most recent change of address, the first three are always 00:13:18.
Not have this file, it will automatically use the current address.
nonstandard_encoding
With the fan scrplg script disable.sh the fan-in boxes without HDD can be permanently disabled.
To run the script in the plugin script.
Functions on color keys
=========================
Favpip" onmouseout="this.style.backgroundColor='#fff'">Red => Favpip
Emu neustarten" onmouseout="this.style.backgroundColor='#fff'">Yellow => Emu restart
Zoommodus wechseln." onmouseout="this.style.backgroundColor='#fff'">Green => zoom mode switch.

http://rapidshare.com/files/320721525/PGI-9000-v0.4.rar

opravy : 1) hdtemp plugin http://www.ab-forum.info/download/file.php?id=21573
2) oprava pevna IP adresa http://www.ab-forum.info/download/file.php?id=21583
Stahni, rozbal a prepis v /var/bin/init.d, pak chmod +x /var/bin/init.d/1.network.start


Naposledy upravil slimr dne 15.prosinec 2009 - 20:35, celkově upraveno 3



14.prosinec 2009 - 14:45
Profil
Moderátor
Moderátor

Registrován: 28.červen 2008 - 9:06
Příspěvky: 2346
Bydliště: Čadca
Příspěvek Re: Image - PGI team
Tak som urobil novy addon pre PGI v4 (funguje aj pod v5), ktory zapne automaticke stahovanie klucov a upravi EPG na DigiTV (nonstandard_encoding). Addon sa nainstaluje cez webif a po instalacii treba restartnut box aby sa zaplo to automaticke stahovanie klucov.

Ovladanie tlacitok ostava tak ako to ma PGI.


Nemáte oprávnění prohlížet přiložené soubory.

_________________
AB IP Box 9000HD (2x DVB-S2 tuner Conexant CX24116) 19E,23.5E,13E,0.8W E2 NEBULA v3
AB IP Box 9900HD (2xDVB-S2) 23.5E,0.8W E2 PKT HAARP v3a
AB CryptoBox 450HD v19.B1 Patch 23.5E,0.8W
AB Cryptobox 500HD V1.07.5744 Patch 23.5E,0.8W
Karty: SkyLink ICE, NEXT (cacheex READY)


14.prosinec 2009 - 18:58
Profil ICQ
Moderátor
Moderátor
Uživatelský avatar

Registrován: 05.únor 2007 - 16:38
Příspěvky: 15693
Bydliště: okr.Prievidza
Příspěvek Re: Image - PGI team
PGI v0.5, Höllenbrut
Kód:
Features
========

- Based on GSA 11,577
- HD channels to function smoothly, thanks to fixed second driver.
- Newcs, mgcamd-1.33, incubus and mbox are installed, but are pre-configured only newcs and mgcamd.
- Current stable busybox 1.15.3 installed.
The shell commands so that all the work, and the shell has a continuous history.
Moreover, the text editor nano is still attached to the console.
- Own card drivers.
- Streaming Player sbox fixed (server part):
Works better with encrypted channels, the quality of the stream.
- Reduce boot time
- Color keys covered with scripts to change emus (see below)
- And other minor changes ...

Changes
=============
General:
- NFS share can be used as a disk replacement
- Support for DRE-Cam's
- Added: mg_launcher for people who have problems with the normal mgcamd.
- Update: WebIF 1.5
- Update: Busybox 1.15.3
- Update: Sqlite 3.6.21
- Update: e2fsprogs 1.41.9

sbox:
- Fix: auto mounting works again
- Fix: connected and disconnected to be translated into the no longer mount_manager_fstab
- Fix: The EPG parser no longer hangs on channels with just now & next information (thanks to kneubi)
- Function of PgUp / Down buttons and </> buttons in the channel and favorites lists exchanged
- Timeshift can be terminated with the stop button
- Recording playback can now be stopped directly in the file list
- Normal volume bar is displayed in the video player
- Inquire password can now generally by purchase or option to be switched off (in the Parental Control menu)
- The volumes are stored by channel switch when applied immediately
- The channel list can be sorted Alphabetically with the blue button instead of jumping to your Favorites.
The favorites are still accessible via the FAV button.
- Multicast in streaming player working again
- Unicast streaming option on the player away. If you only need unicast should rather use the WebTV Webif.
- WWW button on the Fb may be assigned a script, / bin / var / www.sh
- New menu item in the main menu Forecasts
- OSD Screenshots now work in WebIF

Konfigurácia
=============
Nastavenia sluzieb spustanych pri starte su vo / var / etc
boot_services.cfg
Služby sú napríklad samba, nfs, newcs, atď
Su tu aj nastavenia skinov a nastavenia EMU
my.ethaddr
V tomto subore je mozne nastavit pevnu MAC adresu - nebude sa menit po havarii systemu.
Daju sa zmenit len posledne tri hodnoty - prve tri ( 00:13:18) su nemenne !


Funkcia farebnych tlacidiel:
=========================
Cervene => FAVpip
Zlte => restart Emu
Zelene => zoom prepínač režimu.
Příloha:
PGI-9000-v0.5.zip


Billy-sk píše:
Pre PGI v5 funguje rovnaky Addon ako pre v4
:arrow: download/file.php?id=21557


Nemáte oprávnění prohlížet přiložené soubory.

_________________
Jesenna davka Vitaminov tu !


12.leden 2010 - 21:46
Profil
Znalec fóra
Znalec fóra
Uživatelský avatar

Registrován: 09.březen 2008 - 11:31
Příspěvky: 663
Příspěvek Re: Image - PGI team
PGI v0.6, Destoroyah

Upozornenie: nedavat do PGI v6 ABFaddon z PGI v5 !!!


| PGI v0.6, Destoroyah |
| based on DGS 11834 |
+----------------------+

Many thanks to uncle.f for helping to prepare this release!


THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. UNDER NO CIRCUMSTANCES WILL THE PGI SOFTWARE AUTHORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR EXEMPLARY DAMAGES, DATA LOSS OR HARDWARE MALFUNCTION, ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE UNDER NEGLIGENCE OR EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. BY INSTALLING AND USING THE SOFTWARE, YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT


Table of Contents
===============================================================================

- New Features Highlights
- Full Change List Since Last Release
- Other Important PGI Features
- Colour Buttons Default Functions
- Notes on Hard Disks, Flash Media and Formatting
- Notes on Multiboot
- Notes on Irdeto Cards in the Internal Cardreader
- Configuring Settings Using pgi.conf



New Features Highlights (exclusive to PGI)
===============================================================================

- Special oscam version exclusive to PGI, which can be used not only as a cardserver but also as a dvb-api client (no need to use mgcamd as a client any more). Additionally, ECM PID priority, Irdeto ChID mapping and BISS/CCW support was added to oscam.
- Support for more Wi-Fi/USB devices than in any other image (3 different Ralink chipset drivers included)
- Full support for pppd and iptables for direct Internet connection using USB connected mobile phones and 3G/CDMA/HSDPA modems
- Experimental internal cardreader driver to work with some previously non-working Irdeto 5.x cards
- NTFS file system support (read only mode)
- New exclusive sleep timer menu available via the Power button on the remote control
- Full channel and transponder editing as well as service scanning is possible even when the recording timers are set
- Completely reworked aspect ratio handling for the 4:3 channels on 16:9 TVs
- Added automatic and manual cleaning of the temporary timeshift files
- Added channel provider information to the info banner
- Lots of other smaller new features and bug fixes (described below in full)



Full Change List Since Last Release
===============================================================================

General changes:

- The main settings file /var/etc/boot_services.cfg has been renamed to /var/etc/pgi.conf. It now contains LOTS of new options (explained in full below)
- Added a special modified cardserver/client oscam, based on svn revision 1939. Patches from pacco add several new features, including dvb-api client mode on IPBox, which allows to clear channels without using mgcamd as the client, a feature to filter ECM PIDs, a feature to map Irdeto ChIDs to channels (something that mgcamd cannot do at all) and a feature to support BISS and CCW. See file OSCAM_en.txt for more details
- Support for Wi-Fi/USB devices based on Ralink RT2870 and RT3070 chipsets. Wi-Fi setup is performed by editing relevant config files. More details can be found in the NETWORK_en.txt file
- Support for direct Internet connection using PPP which includes PPPoE, as well as USB/Serial Generic, PL2032 and CDC-ACM drivers for certain mobile phones with USB cable and 3G/CDMA/HSDPA USB modems (including usb_modeswitch!). More details can be found in the NETWORK_en.txt file
- Full iptables (Linux firewall) support for direct Internet connection protection. Additional configuration allows you to use the receiver as a router (NAT, masquerading, etc. is possible). More details can be found in the NETWORK_en.txt file
- Experimental internal cardreader driver which makes it possible to force a custom "base frequency". This MAY enable support for SOME Irdeto 5.x cards. Use at your own risk (read more below)
- Added support for Linux udev, which allows automatic driver loading and handling of the hot-plugged devices.
- Added NTFS file system support for USB connected devices including auto mounting (read only mode)
- Web interface has been updated to version 1.5.01
- mgcamd has been updated to version 1.35
- Fixed a problem with flashing images from a USB device using the receiver's OSD menu
- Improved WebTV, especially Twin-Tuner mode
- Added a user-configurable standby time for SATA HDDs
- Added the possibility to choose which network protocol (TCP or UDP) should be used for NFS-share recording
- Added cron service for automatic user scripts execution with user provided schedule
- Added the possibility to synchronise the receiver's clock with an NTP server during receiver startup (those who want permanent NTP synchronisation should use a cron job. cron should be enabled and the crontab file edited to contain the ntpsync command)
- Added Secure FTP (SFTP) service
- Added a script for manual and automated cleanup of temporary timeshift files. User can specify a minimum age of the files to be deleted. Script plugin (assigned to WWW button) can be used to perform manual cleanup (except 91HD remote, where WWW button is not available and you have to call the script plugin via the plugins menu)
- Added a script to save all user settings from /var to the internal HDD or external device, as well as a script to restore the settings. This is very useful when flashing the receiver with a new image. You can save the settings using a script plugin menu (assigned to WWW button, except 91HD). To restore settings you can either use the same menu, or press and hold the 9 button during cold boot until the message "RESTORE BKUP" is displayed on VFD. After that the settings will be restored and the receiver will be rebooted automatically.
ATTENTION: the "hold the 9 button" feature only works with backups stored in the default location on the HDD. Furthermore, it is based on multiboot configuration, therefore if you flash a different multiboot, the function will be lost. To restore it run the following Telnet command:
fw_setenv menu_9 'setenv bootargs $bootargs restore_backup=1;front_puts "restore bkup";boot'
- Added a "boot pause" feature, which pauses the receiver boot sequence after the network is initialised. This is very useful if your db.dat or skin has become corrupt and the receiver no longer boots correctly. You can pause the boot sequence and upload the correct db.dat, skin or pgi.conf with different settings. To enable boot pause, press and hold the 8 button during cold boot, until "BOOT PAUSE" is displayed on the screen. The boot process will be paused when the message changes to "PRESS ANYKEY". To continue the boot process press any key. ATTENTION: the "hold the 8 button" feature is based on multiboot configuration, therefore if you flash a different multiboot, the function will be lost. To restore it run the following Telnet command:
fw_setenv menu_8 'setenv bootargs $bootargs boot_pause=1;front_puts "boot pause";boot'
- Added a simple script to flash images from Telnet without the need for a USB stick. The image must be on a HDD, USB or network share which must be WRITEABLE (for temporary files during the flash process). To start flashing, just use the following Telnet command:
flash image-name
- mbox and incubus have been removed from the image (they are still supported by scripts and pgi.conf, but you must copy the binaries and configs to /var/bin and /var/keys yourself)
- The aspect ratio ("zoom modes") script has been removed from the image, as this function is now built into the main interface and the settings are in pgi.conf
- The "cooling fan stop" script has been removed, this is now controlled from the pgi.conf file
- The private_epg_info and nonstandard_encoding files have been moved to /var/etc/epg


sbox changes:

- Fix: Custom channel volume settings get correctly applied after unmuting
- Fix: No panics on scheduled EPG recordings
- Fix: 14:9 AR mode gets applied correctly on channel changes
- Fix: Automounter mounts a usb-stick with vfat instead of msdos filesystem
- Fix: Allow deletion of transponders even when the Sat is assigned to an LNB (the channels will be deleted from DB and FAVs as well as the timers for those channels)
- Fix: Allow editing channels when timers are set
- Fix: Allow entering the channel scanning menu even when timers are set
- Fix: Allow entering of LNB Settings menu when timers are set
- Fix: Sleep timer does not stop recording
- Fix: Last watched channel is saved correctly if the receiver has been powered off by a timer
- Change: Moved Wakeup timer from the Time menu to the Power Control menu
- Remove: Fast Scan (NL), Streaming Player, M3U Player and Wi-Fi settings menus as they create more problems that they solve
- Remove: 60Hz HDMI output modes as they do not solve any problems but only create them :)
- Remove: (L)eft and (R)ight polarisation types in manual scanning mode. Use V/H for all LNB types, as follows: R=V, L=H
- Add: completely reworked aspect ratio handling. The modes are configured in pgi.conf, change very fast and does not get reset after using OSD menus (while watching the same channel). See ASPECT_RATIO option in pgi.conf
- Add: New popup for controlling sleep timer and power options when holding the power button. See POWER_OFF option in pgi.conf
- Add: Front panel display brightness can be adjusted. See VFD_BRIGHT option in pgi.conf
- Add: Channel provider name added to the info banner (next to the satellite name)
- Add: The weather forecast, RSS feed, media player can be called using colour buttons. To enable this function, edit the relevant script in /var/bin (red.sh, green.sh, yellow.sh or http://www.sh) and place the following 2 lines into it:

#!/bin/sh
echo "web_change_menu MENU" > /dev/commander

where MENU is one of the following: menu_weather, rss_reader, vidp_list



Other Important PGI Features (not new but still rocking!)
===============================================================================

- Removed freezes on HD channels thanks to corrected drivers
- The latest stable Busybox version for the Linux command line fans
- All shell commands work correctly together with the shell command history
- Improved cardreader driver by pacco
- Cold start time is improved (giving more startup features at the same time)
- Modular settings for enabling only the services which are really needed
- Picture blanking on channel change
- Optional password disabling for editing channels and recordings
- Improved handling of non-ASCII recording file names using transliteration
- Stop button is enabled for stopping timeshift and recorded files preview
- Improved channel list navigation



Colour Buttons Default Functions
===============================================================================

ATTENTION! On IPBox 91HD, Cuberevo 250 and 200HD models only the GREEN button actions can be changed by the user!

Red button => FavPiP plugin
Green button => Change Aspect Ratio script
Yellow button => Restart Softcam
WWW => Script Panel Plugin (calls the scripts from /var/bin, script names must start with scrplg-*)



Notes on Hard Disks, Flash Media and Formatting
===============================================================================

1) PGI WILL NEVER EVER FORMAT YOUR DISKS OR FLASH MEDIA BY ITSELF!
2) If you want to format your storage device which is already recognised by the receiver, use the option in the OSD menu (PVR Settings)
3) If the device is not being recognised, you can force formatting by pressing the "power button + arrow down" combination during the start of the cold boot sequence (it may take up to 20 minutes or even longer to format some of the high capacity HDDs, especially USB disks)
4) By default the ext3 file system will be used to format the disk, when requested by the user. You can change the default filesystem to ext2 using HDD_FS parameter in pgi.conf file (see pgi.conf description below)
5) If your SATA HDD is still not being recognised even after a forced format, then it is most likely incompatible with the receiver. Some users had success by switching HDDs from SATA 2 into SATA 1 mode by using a special jumper on their HDD. In any case, it is worth checking the boot logs (see the DEBUG option in pgi.conf)
6) By default only the device with the name "sda" will be used as the recording device (and formatted as such if requested). SATA HDD always has priority over USB devices, i.e. if you have both SATA and USB storage devices connected, then the SATA disk will have the "sda" name and the USB device will be called "sdb". It is possible to change the device used for recording (and formatting) if you have some special requirements (see HDD_DEVICE parameter in pgi.conf)
7) All devices with a capacity of less than 64GB will NOT be used as recording devices, even if formatted correctly. This is to prevent flash media, which is used for multiboot, from being affected by PGI recordings. This "limitation" can be dropped by setting HDD_MIN_SIZE parameter in pgi.conf accordingly (see below)
8) Some USB HDDs spin up too slow to be detected by the start up routine during a cold boot. To overcome this problem you can configure a slight delay for USB HDD detection. See HDD_DELAY1 and HDD_DELAY2 parameters in pgi.conf below



Notes on Multiboot
===============================================================================

IMPORTANT! If you want to create USB sticks with bootable images (for example e2), you need to use the following command to create the filesystem:
mkfs.ext2 -I 128 /dev/...

If you want to flash another multiboot after installing PGI, consider the following. In PGI the multiboot keys act as follows:

0 - boot flash (normally for DGS/PGI)
1 - enigma flash
2 - enigma /dev/sda1
3 - enigma /dev/sdb1
4 - enigma2 flash
5 - enigma2 /dev/sda3
6 - enigma2 /dev/sda4
7 - enigma2 /dev/sda5
8 - PGI boot pause mode (see the description of this new function above)
9 - PGI settings restore mode (see the description above and also the BACKUP_DIR option in pgi.conf)

If you are not satisfied with this layout or if one or more of the buttons do not work the way you wish, it is much easier to simply change those buttons' actions than to flash the complete multiboot (and lose the new functionality for buttons 8 and 9). The multiboot options can be easily edited to your liking with the Telnet commands: fw_printenv and fw_setenv.



Notes on Irdeto Cards in the Internal Cardreader
===============================================================================
The card reader driver (sci-ng) has been modified in this version to be able to set a so called "base frequency" (see the beginning of the /var/bin/sсi-ng script). "Base frequency" in this context is not a frequency for the cardreader but rather a proposed base frequency from which the cardreader controller derives its actual working frequency. By default the "base frequency" is set to 100000000, i.e. 100MHz and the cardreader frequency is derived from it by dividing the base frequency by an even number between 2 and 62 (the actual number is detected automatically to fit the card frequency as close as possible). By changing the base frequency it is possible to get some cards working which were not working before. For instance, it has been detected that some Irdeto 5.3 cards can work if the base frequency is set to 111093750.

WARNING! As already mentioned in the disclaimer above, the changing of any values, such as cardreader frequency, is performed entirely at your own risk!



Configuring Settings Using pgi.conf
===============================================================================

The image specific configuration is located in /var/etc/pgi.conf. All lines starting with # are treated as comments. The lines like OPTION="VALUE" set various parameters. ATTENTION! There must be NO SPACES before or after the equals sign! The file can be edited by any text editor that saves files in a plain text format.

The options are read from this file only once during the boot sequence, so if you want to commit your changes you need to reboot the receiver. Below is a detailed description of all the possible parameters that can be set in the file pgi.conf. Do not be put off by the large number of options! The receiver will work fine with most of them unchanged out of the box. They only need to be changed if you require some additional functionality or modified behaviour.


ASPECT_RATIO
The comma separated list of Aspect Ratio modes to be changed in a sequence by the "green-button" script. Every time you press the green button to change the "AR mode", the sequence you set here will be used (in a repeating loop).
The values can be as follows (can be used in any sequence or combination):
pillarbox - the 4:3 picture is shown on 16:9 screen with black side bars
14:9 - similar to the above, but zoomed a bit, with smaller side bars
panscan - even bigger zoom for the 4:3 picture, without side bars
widescreen - picture is stretched to fill the 16:9 (distorted AR for 4:3)
cinema - can be used on 2.39:1 movies to fill the 16:9 tv completely
Example: ASPECT_RATIO="panscan,14:9,pillarbox"

BACKUP_DIR
Sets the directory name for backing up and restoring all user settings (normally, on the internal HDD or on the external device). It is very convenient to backup all the settings before flashing a new image and then to restore in one quick operation. The backup and restore functions must be invoked manually using the script plugin, which is available in PGI via the WWW button on the remote (except 91HD, where this plugin can be called via the plugins menu).
Default value: "/media/pgi-backup" (for backing up to the same device which is used for channels recording)
Example: BACKUP_DIR="/mnt/usb/usb0" (for using a USB stick for the backup and restore procedures)

CARDSERV
Sets the card server to read local cards in the cardreader.
Possible values: newcs, oscam, none
Default value: newcs
Example: CARDSERV="oscam"

CI_INIT
Enable or disable support for CI modules. To load less drivers set to "no".
Possible values: yes, no
Default value: yes
Example: CI_INIT="no"

CRON
Enable or disable cron service which allows certain repeating tasks (like user scripts) to be to run at a certain time, for example, every day or every hour, etc. The service uses a configuration file that can be modified using a Telnet command: "crontab -e" which uses the syntax described here: http://en.wikipedia.org/wiki/Cron#crontab_syntax
If you enable the MEDIA_CLEAN option (see below) then cron will be started automatically and this option will be ignored.
Possible values: yes, no
Default value: no
Example: CRON="yes"

DEV_BANNER
Show or hide the OSD banner which displays the connectedm and disconnected, CAM module and USB devices. The 'skip1st' value will not show the banner the very first time it is called. This option is useful to get rid of the banner showing every time you start the receiver.
Possible values: always, skip1st, never
Default value: skip1st
Example: DEV_BANNER="never"

ETH_ADDR_LOW
If the receiver is not cleanly shut down, the MAC address of your box may change. This option tries to solve that problem. If you set option to "auto", then the current MAC address (as reported by ifconfig) will be set for the next boot. If you want a custom MAC address, you can hard code it with this option. It is only possible to choose the last three blocks of the MAC address. The first three blocks are fixed and will always be "00:13:18". If you do not want your MAC address to be touched, set this option to "none".
Possible values: auto, none or user defined address
Default value: auto
Example: ETH_ADDR_LOW="ab:cd:ef" (the final MAC will be: 00:13:18:ab:cd:ef)

FAN_9000_ON
This option controls cooling fan ONLY ON IPBox 9000HD! Other IPBox models do not have software fan control!
Possible values: yes, no
Default value: yes
Example: FAN_9000_ON="no"

HDD_SLEEP
The time in MINUTES after which the HDD should start sleeping (only if inactive)
Possible values: 0 (no sleeping), 1 .. 20 and then 30, 60, 90, 120... etc.
Default value: 10
Example: HDD_SLEEP="3"

HDD_TMD
Enables or disables the HDD temperature service.
Possible values: yes, no
Default value: no
Example: HDD_TMD="yes"

MEDIA_CLEAN
Enables or disables automated cleanup of temporary media files. This cleanup job runs every 3 hours and will remove all tmp files in the /media directory which are older than the number of MINUTES specified as a value to MEDIA_CLEAN. If this parameter is set to a value other than 0 or "no", then the cron daemon will be started, whether you have enabled it or not.
Possible values: no, a positive numeric value (in minutes)
Default value: no
Example: MEDIA_CLEAN="30"

NFSD
Enables or disables NFS services on the IPBox. This is ONLY required if you want to access the files which are located on the IPBox from another device using NFS protocol. This option is NOT needed for NFS recording (see below).
Possible values: yes, no
Default value: no
Example: NFSD="yes"

NFS_REC
Enables recording to a remote NFS share INSTEAD of a HDD. The value can be either "no" (to disable NFS share recording) or the full path to the NFS share that will be used for recording (instead of the HDD).
Default value: no
Example: NFS_REC="192.168.1.2:/myshare"
Attention: you do NOT need to set NFSD="yes" for NFS_REC to work!

NFS_REC_PROTO
This is only used in conjunction with the NFS_REC parameter (see above). Normally it should be set to "tcp" for a more reliable connection. If your NFS server does not support the TCP protocol, set it to "udp".
Possible values: tcp, udp
Default value: tcp
Example: NFS_REC_PROTO="udp"

NTP_SYNC
Enables or disables time synchronisation with an NTP server. The synchronisation will be performed only ONCE during receiver power up.
Possible values: no, an IP address or a name of an NTP server
Default value: no
Example: NTP_SYNC="ntp2.fau.de"

POWER_OFF
Sets the behaviour for the power button on the remote control. If the value is set to "hold", then you need to hold the power button for 2 seconds to power off the receiver while the short press will call up the sleep timer menu. If set to "press", then the behaviour will be reversed.
Possible values: hold, press
Default value: hold
Example: POWER_OFF="press"

PPPD_PEER
Set the name for the peers file to be used by the pppd service automatically during receiver startup. This parameter is required if the USB_MODEM parameter is being used (see below) or if you are using a PPPoE connection. The peers file specified by this option must exist in /var/etc/ppp/peers directory.
For more information refer to a separate NETWORK_en.txt document
Possible values: none or custom name
Default value: none
Example: PPPD_PEER="gprs"

SAMBA
Enable or disable the Samba service. This is ONLY required if you want to access the files which are located on the IPBox from another device using Windows File Sharing (SMB) protocol.
Possible values: yes, no
Default value: no
Example: SAMBA="yes"

SKIN
Sets an alternative skin. The value should be the FULL ABSOLUTE PATH of the directory containing the skin (often in /var/skins) directory. The name is CASE-SENSITIVE!!! You can put your skins on the HDD or a USB stick and use them instead of the /var directory.
Default value: default (built-in skin)
Example (for a skin in /var): SKIN="/var/skins/MySkinName"
Example (for a skin on HDD): SKIN="/media/skins/MySkinName"

SOFTCAM
Sets the softcam/emu to be used. Attention: if you do NOT select oscam as your softcam, your oscam.conf will be automatically modified to prevent conflicts between oscam server and other softcams.
Possible values: mgcamd, mglauncher, oscam, incubusCamd, mbox or none
Default value: mgcamd
Example: SOFTCAM="oscam"

USB_MODEM
Sets the ID for the USB modem to be initialised when it is connected. You need to configure the PPPD_PEER parameter above as well for this to work. The complete procedure for USB 3G/CDMA/GPRS connections is described in a separate text document called NETWORK_en.txt
Possible values: none or the custom USB ID in the form of VEND:PROD
Default value: none
Example (for Toshiba G450 3G modem): USB_MODEM="0930:0d46"

VFD_BRIGHT
Sets the brightness of the front panel VFD display for the IPBox models that support it. Should be a number in the following range: 0..7, where 0 is least bright and 7 is the most bright
Possible values: 0, 1, 2, 3, 4, 5, 6, 7
Default value: 7
Example: VFD_BRIGHT="0"

WEBTV
Enables or disables PERMANENT Web-TV / VLC streaming. Normally only required when you do NOT use IPBox web interface for watching Web-TV (for instance, when watching directly with VLC player). The web interface should automatically start streaming when required
Possible values: yes, no
Default value: yes
Example: WEBTV="no"

###############################################################################

Below are some additional "hidden" parameters that normally SHOULD NEVER BE TOUCHED ;-) although sometimes they can help with troubleshooting or make your weird setup work :)

DEBUG
Should only be used to troubleshoot problems and should never be permanently enabled as it slows down the boot process.
DEBUG="yes" will produce some boot sequence log files in the /var/log
DEBUG="IP PORT" will send the logs to the UDP port and IP address specified
Note: if the network is unavailable during network debugging, the consequences are unpredictable.

DONTPANIC
Should be used to stop the box from rebooting when a panic is encountered. This is normally used by developers only to debug the panic attacks :)
DONTPANIC="yes" will enable this option.

HDD_DELAY1 and HDD_DELAY2
The delay intervals (in seconds) before the HDD is initialised. Normally a delay is NOT required. Some users with USB HDDs have problems with HDD recognition. In such a case, first try setting HDD_DELAY1 to 20 or 30 sec. If this does not help, try setting HDD_DELAY1 as well as HDD_DELAY2. Attention: setting HDD_DELAY2 will make your boot LONGER!
Example: HDD_DELAY1="30"

HDD_DEVICE
The name of the storage device to be used for channel recording. Normally, it is set to 'sda' and should not be changed unless you have some exotic requirements (and hopefully you know what you are doing).
Default value: sda
Example: HDD_DEVICE="sdb"

HDD_FS
The name of the filesystem to use on the HDD_DEVICE during HDD formatting. Setting this option WILL NOT re-format the existing system! You will have to manually invoke format from the OSD menu or use the front panel buttons during the receiver boot sequence! If this option is not set, "ext3" will be used the next time you format the storage device.
Possible values: ext2, ext3
Default value: ext3
Example: HDD_FS="ext2"

HDD_MIN_SIZE
Minimum allowed size (in GB) for a storage device to be used for recording. If the size of the recording device is less than this value, then the device will be ignored for the purpose of channel recording. If you want to record to USB stick which is 32GB or less, then you need to reduce this parameter.
Example (for 32GB stick to be used for recording): HDD_MIN_SIZE="32"

#############################################################################

Have fun,
pacco & uncle.f

:arrow: http://www.dreambox.info/dreamboxdb/att ... entid=3980


27.březen 2010 - 13:28
Profil
Moderátor
Moderátor

Registrován: 28.červen 2008 - 9:06
Příspěvky: 2346
Bydliště: Čadca
Příspěvek Re: Image - PGI team
Automaticke stahovanie keys do PGI v6:

1. treba v pgi.conf zapnut cron (trba tam dat yes alebo netreba ak je nastavene mazanie timeshiftingu starsieho ako nieco ...)
2. treba rozbalit a nakopirovat cez ftp fo boxu subor scrplg-loadkeys.sh (je v prilohe) do /var/bin/ a nastavit attributy na 755.
3. vo /var/spool/cron/crontabs/ je subor root (ak sa nevytvoril, treba po zapnuti cron restartnut box a po chvili by sa to malo vytvorit). V tom subore treba pridat riadky na stahovanie keys:

30 19 * * * /var/bin/scrplg-loadkeys.sh
00 22 * * * /var/bin/scrplg-loadkeys.sh
00 06 * * * /var/bin/scrplg-loadkeys.sh
00 08 * * * /var/bin/scrplg-loadkeys.sh
00 10 * * * /var/bin/scrplg-loadkeys.sh
00 12 * * * /var/bin/scrplg-loadkeys.sh
00 14 * * * /var/bin/scrplg-loadkeys.sh
00 16 * * * /var/bin/scrplg-loadkeys.sh
00 18 * * * /var/bin/scrplg-loadkeys.sh
30 23 * * * /var/bin/scrplg-loadkeys.sh

netreba davat vsetky, prve cislo su minuty a druhe hodiny kedy sa spusta stahovanie. cize prvy riadok znamena ze sa pusti o 19:30. Podla toho si mozete upravit casy tak ako treba, pripadne si dat stahovat len raz denne.


Nemáte oprávnění prohlížet přiložené soubory.

_________________
AB IP Box 9000HD (2x DVB-S2 tuner Conexant CX24116) 19E,23.5E,13E,0.8W E2 NEBULA v3
AB IP Box 9900HD (2xDVB-S2) 23.5E,0.8W E2 PKT HAARP v3a
AB CryptoBox 450HD v19.B1 Patch 23.5E,0.8W
AB Cryptobox 500HD V1.07.5744 Patch 23.5E,0.8W
Karty: SkyLink ICE, NEXT (cacheex READY)


04.duben 2010 - 21:54
Profil ICQ
Moderátor
Moderátor

Registrován: 28.červen 2008 - 9:06
Příspěvky: 2346
Bydliště: Čadca
Příspěvek Re: Image - PGI team
PGI v0.6.1, Hedorah

Upozornenie: nedavat do PGI v6 ABFaddon z PGI v5 ani ziadneho starsieho !!!


| PGI v0.6.1, Hedorah |
| based on DGS 11834 |
+----------------------+

- Fix: panic when entering media/mp3/photo player with no storage device connected
- Fix: oscam fixes preventing crashes and better handling of oscam.pids file
- Fix: oscam was not started when only set as CARDSERV
- New: complete HDD status information during HDD initialisation (see new readme HDD_en.txt)
- Update: New menu "HDD Setup" in the Installation Menu. It contains the items for HDD formatting and HDD consistency checking
- Update: improved usb_modeswitch functionality
- Update: improved logging and debugging functionality
- Update: Web Inteface 1.5.03b with WLAN config functionality
- Update: most complete and up to date satellite and transponder lists (source: kingofsat.net and lyngsat.com)
- Removed: FAN_9000_ON option from pgi.conf. The function is now accessible via Power Control OSD menu
- Removed: HDD_TMD option from pgi.conf. The function is accessible via the HDD Temperature plug-in

http://www.dreambox.info/dreamboxdb/attachment.php?attachmentid=4013

Oprava WebIf:

Webif ma par problemov, preto rozbal a vyexportuj subory v prilohe cez ftp:

tuner.js a Common.js do / var / www / js / common
module_recordings.js do / var / www / js / modules /


Nemáte oprávnění prohlížet přiložené soubory.

_________________
AB IP Box 9000HD (2x DVB-S2 tuner Conexant CX24116) 19E,23.5E,13E,0.8W E2 NEBULA v3
AB IP Box 9900HD (2xDVB-S2) 23.5E,0.8W E2 PKT HAARP v3a
AB CryptoBox 450HD v19.B1 Patch 23.5E,0.8W
AB Cryptobox 500HD V1.07.5744 Patch 23.5E,0.8W
Karty: SkyLink ICE, NEXT (cacheex READY)


09.duben 2010 - 20:20
Profil ICQ
Moderátor
Moderátor

Registrován: 28.červen 2008 - 9:06
Příspěvky: 2346
Bydliště: Čadca
Příspěvek Re: Image - PGI team
ABF addon pre v6 a 6.1

Tak som urobil novy addon pre PGI v6 a 6.1 (nefunguje v nizsich verziach).

NEDAVAT DO BOXU BEZ HDD !!!

- zapne automaticke stahovanie klucov
- upravi EPG na DigiTV (nonstandard_encoding)
- EPG sa uklada rano o 5:30 a po restarte boxu vzdy natiahne poslednu zalohu (da sa vypnut v pgi.conf)
- EPG sa da ulozit aj cez zelene tlacitko (sipka doprava a potom zase zelene Save EPG) alebo cez Scripty (daju sa zapnut aj cez zelene tl., sipka dolava a cervene tl. scripty) a Save EPG do db.
- Restart CAM sa robi cez zelene tlacitko a Restart CAM (da sa zmenit v pgi.conf na povodne alebo dat na zlte tlacitko)
- Zoom funguje na zlte tlacitko a je to moj zoom script, nie ten povodny od PGI. (da sa zmenit v pgi.conf na povodne alebo dat na zelene tlacitko)
- kluce sa daju stiahnut aj rucne - zelene tlacitko a tam zlte (Stiahnut KEYS)
- zapnute mazanie timeshift nahravok starsich ako 300 minut (da sa zmenit alebo vypnut v pgi.conf - hodnota MEDIA_CLEAN="300" na "no" alebo iny pocet minut).
- iny cron, lebo vo verzii v6.1 mi ich cron nesiel (mozno iba mne ale radsej som dal iny, ktory zarucene chodi - da sa prepnut na originalny v pgi.conf). Ak by niekto chcel pridavat do cronu svoje veci, tak treba pridavat do suboru /var/etc/SifTeam/conf/crontab a nie do /var/spool/cron/crontabs/root (v pripade nastavenia CRON_ORIG="yes" plati povodne /var/spool/cron/crontabs/root).

Addon sa nainstaluje cez webif - system - pluginy - Instaluj plugin (treba vybrat addon a stlacit: Upload plugin).
Po instalacii treba natavit cez ftp v /var/etc/pgi.conf hodnoty podla seba (ABF addon nastavil defaultne a pridal nejake nove nastavenia - popis je v pgi.conf naspodu) a potom restartnut box aby sa zaplo to automaticke stahovanie klucov a ukladanie EPG.

9.6.2010 - vymeneny novy upraveny ABF addon:
Po instalacia a restarte boxu a dalsich nastaveni uzivatela (napr. vlastny setting) odporucam stlacit zelene tlacitko, sipka dolava a tam Ulozit zalohu (alebo spustit script: Save User Settings) a na HDD sa ulozi zaloha nastaveni vcetne zalohy ABF addonu, klucov a settingu, takze pri pripadnej instalacii noveho sw od PGI bude stacit spustit script: Restore User Settings a z HDD sa natiahne zaloha aj s ABF addonom, takze ho uz nebude treba znova instalovat. Jednoducho: instalacia noveho PGI, nacitanie zalohy, restart a vsetko bezi ako ma!
- do zalohy sa ulozi aj epg2db.plugin

- pri nacitani zalohy (Restore User Settings) sa do adresa zaloh ulozi aj zaloha dolezitych suborov, ktore sa sa budu menit pri natahovani zalohy pre pripad, ze by niekto chcel niektory subor vratit do povodneho stavu (bude sa ukladat ako subor s nazvom zal.backup.datum.tgz).


Nemáte oprávnění prohlížet přiložené soubory.

_________________
AB IP Box 9000HD (2x DVB-S2 tuner Conexant CX24116) 19E,23.5E,13E,0.8W E2 NEBULA v3
AB IP Box 9900HD (2xDVB-S2) 23.5E,0.8W E2 PKT HAARP v3a
AB CryptoBox 450HD v19.B1 Patch 23.5E,0.8W
AB Cryptobox 500HD V1.07.5744 Patch 23.5E,0.8W
Karty: SkyLink ICE, NEXT (cacheex READY)


11.duben 2010 - 11:28
Profil ICQ
Pokročilý
Pokročilý
Uživatelský avatar

Registrován: 30.listopad 2006 - 21:40
Příspěvky: 191
Bydliště: SK
Příspěvek PGI v0.7.2, Varazahav
Vielen Dank an uncle.f für die Mitarbeit an diesem Release!

DIESE SOFTWARE WIRD "SO WIE SIE IST" OHNE GARANTIE ZUR VERFÜGUNG GESTELLT. DAS PGI TEAM LEHNT AUSDRÜCKLICH ALLE STILLSCHWEIGENDEN GARANTIEN AB, DARIN EINGESCHLOSSEN, JEDOCH NICHT AUSSCHLIESSLICH, STILLSCHWEIGENDE GARANTIEN FÜR TITELRECHTE, VERFÜGBARKEIT, LEISTUNG, NICHT-VERSTOSS, MARKTGÄNGIGKEIT ODER EIGNUNG FÜR EINEN BESTIMMTEN ZWECK. PGI GARANTIERT NICHT, DASS DIE SOFTWARE ODER DAZUGEHÖRIGE DOKUMENTATION KORREKT, AKKURAT, ZUVERLÄSSIG ODER IN ANDERER WEISE FEHLERFREI SIND. DAS GESAMTE RISIKO BEZÜGLICH ERGEBNISSEN UND LEISTUNG DER SOFTWARE UND DAZUGEHÖRIGER DOKUMENTATION LIEGT BEI IHNEN.


Alle Änderungen in PGI 0.7.2
===============================================================

- Fix: Probleme mit dem virtuellen Keyboard und der direkten Kanalnummerneingabe sollten behoben sein
- Fix: cron daemon startet nun korrekt
- Fix: Verbesserungen im database check script
- Fix: Verbesserungen im Netzwerk- und Festplatteninitialisierungs Skript
- Änderung: Namen der Skripte in /var/bin/init.d geändert (siehe auch im Verzeichnis für einige Beispiele)
- Neu: Absolut jedes darstellbare ASCII Zeichen kann jetzt im VFD der Box dargestellt werden. (Ausgenommen in der ersten Generation der VFD Modelle)
- Neu: Man kann jetzt Images vom USB Stick und aus dem /media Verzeichnis der Festplatte direkt aus dem OSD Menü heraus flashen (ebenso kann man den Telnet Befehl "flash" zu diesem Zweck nutzen)
- Neu: Sauberes Herunterfahren und Neustarten durch die Nutzung von runlevels - die Festplatte wird jetzt richtig heruntergefahren und Festplattenfehler sollten dadurch seltener werden
- Neu: Neue Parameter in der pgi.conf: HDD_AWAKE und HDD_DETECT (siehe auch HDD_de.txt)

http://www.dreambox.info/dreamboxdb/thread.php?threadid=2404

_________________
XTREND ET9500 DVBT -DVBS2 tuner E2 , DM7OOOS- GEMINI, IPBOX99 AB E2- IPBOX 91HD -SIFTEAM, ,IPBOX 9000HD - SIFTEAM, 500GB HDD+ DVBT ,DVBS2 tuner , IPBOX 400 - AB E1 ,AB Cryptobox 550HD, Toroidal 90 , 8xLNB Golden Interstar GI202 Twin .


23.červenec 2010 - 23:31
Profil
Moderátor
Moderátor
Uživatelský avatar

Registrován: 29.listopad 2008 - 10:12
Příspěvky: 2403
Příspěvek Re: Image - PGI team
Full Change List for PGI 0.7.2a
===============================================================================

- Fix: problems with virtual keyboard behaviour and direct channel number input should be gone now
- Fix: cron daemon starts correctly now
- Fix: improvements to database check script
- Fix: improvements to network and HDD initialisation scripts
- Change: changed naming of scripts in /var/bin/init.d (see the directory for some examples)
- New: absolutely all printable ASCII characters can now be displayed on VFD (except the 1st generation segment VFD models)
- New: it is now possible to flash images from USB stick and /media partition of the receiver directly via OSD menu (also you can use Telnet command "flash" for the same purpose)
- New: proper shutdown and reboot using runlevels - now HDD is being properly unmounted and HDD errors should become much less frequent
- New: new parameters in pgi.conf: HDD_AWAKE and HDD_DETECT (see HDD_en.txt)

Download1
Download2

_________________
Vu +: Ultimo-3 tunery, DUO, SOLO
Na otázky nepoužívajte SS ale fórum !!


24.červenec 2010 - 21:54
Profil
Znalec fóra
Znalec fóra
Uživatelský avatar

Registrován: 01.listopad 2007 - 15:30
Příspěvky: 726
Příspěvek Re: Image - PGI team
+------------------------------+
| PGI v0.8.1, Badageobug |
| basierend auf DGS 13078 |
+------------------------------+

Vielen Dank an uncle.f und arvy für die Mitarbeit an diesem Release!

DIESE SOFTWARE WIRD "SO WIE SIE IST" OHNE GARANTIE ZUR VERFÜGUNG GESTELLT. DAS PGI TEAM LEHNT AUSDRÜCKLICH ALLE STILLSCHWEIGENDEN GARANTIEN AB, DARIN EINGESCHLOSSEN, JEDOCH NICHT AUSSCHLIESSLICH, STILLSCHWEIGENDE GARANTIEN FÜR TITELRECHTE, VERFÜGBARKEIT, LEISTUNG, NICHT-VERSTOSS, MARKTGÄNGIGKEIT ODER EIGNUNG FÜR EINEN BESTIMMTEN ZWECK. PGI GARANTIERT NICHT, DASS DIE SOFTWARE ODER DAZUGEHÖRIGE DOKUMENTATION KORREKT, AKKURAT, ZUVERLÄSSIG ODER IN ANDERER WEISE FEHLERFREI SIND. DAS GESAMTE RISIKO BEZÜGLICH ERGEBNISSEN UND LEISTUNG DER SOFTWARE UND DAZUGEHÖRIGER DOKUMENTATION LIEGT BEI IHNEN.


Vor dem Installieren des Images
===============================================================

Dieses Image basiert auf den neuen DGS Images. Es gibt bedeutende Unterschiede zwischen dieser PGI Version und älteren Versionen vor 0.8:

* Das Image benutzt neue Treiber und einen neuen Kernel zusammen mit der neuen Grafischen Oberfläche
* Die Aufnahmen aus den älteren Images sind NICHT kompatibel mit dieser Version, aber es gibt ein Tool um sie zu konvertieren (siehe CONVERTER_de.txt)
* Die plugins aus den alten Images sind NICHT kompatibel und müssen upgedatet werden damit sie wieder funktionieren



Alle Änderungen in PGI 0.8.1
===============================================================

- Fix: die alte Version der /media/filelist.meta wird automatisch beim booten gelöscht, falls vorhanden (um epic fails beim booten zu verhindern)
- Update: Fehler im Tool zum konvertieren von Aufnahmen behoben
- Fix: Das mounten von USB und Netzwerkmedien hat nicht funktioniert
- Fix: Die Option für die EPG Hintergrundsuche in den PGI Settings hat nicht funktioniert
- Fix: der PPPd daemon war nicht vollständig aktiviert



Alle Änderungen in PGI 0.8
===============================================================

- Basiert auf den Images mit neuer Oberfläche und STLinux-2.3
- Viele features und fixes aus den alten Images wurdn portiert (zu viele, um sie alle zu erwähnen)
- Update: busybox 1.17.1
- In der einspaltigen Kanalliste werden die nächsten drei EPG Events angezeigt
- In der Unterkanalliste können auch nur die Favoriten angezeigt werden
- Wesentlich bessere Bildqualität bei PiP
- Viele weitere Verbesserungen bei PiP und der Unterkanalliste
- Boxen mit Conexant Tunern rebooten nun schneller, da die Tuner firmware nur noch einmal hochgeladen wird
- Werkzeug zum Konvertieren von Aufnahmen aus den alten Images (danke an arvy). Genauere Informationen zu dem tool findet man in der CONVERTER_de.txt
- Der Roten, Grünen und Gelben Taste können nun auf allen Modellen beliebige Funktionen zugewiesen werden (übers WebIf)
- Eigene Bildseitenverhältnisse können nun mit der /var/etc/ar.conf definiert und benutzt werden (siehe die detaillierten Erklärungen in der Datei)
- Neue Option welche die Kanalnamen auf dem VFD Display in Großbuchstaben darstellt

Pre vsetkych, ktory maju Epic Fails po boote na novom image alebo po prechode na stary:

Vymazat subor /media/filelist.meta z disku


Nemáte oprávnění prohlížet přiložené soubory.

_________________
IPBox 9000 1xDVB-S2 1xDVB-T2 HDD 2,5" WD 320GB relé Spaun SUR 211 F 1x parabola 80cm multifeed LNB Titanium 0.2dB Diseqc přepínač 1/4 28,2°E+23,5°E+19,2°E+13,0°E 1x parabola Gibertini 102x95cm motor Stab HH120 LNB Inverto Black Ultra TV LED LCD LG 42SL9000


15.srpen 2010 - 15:15
Profil
Pokročilý
Pokročilý
Uživatelský avatar

Registrován: 30.listopad 2006 - 21:40
Příspěvky: 191
Bydliště: SK
Příspěvek Re: Image - PGI team
PGI v0.9 Shokkiras for Ipbox 9000HD
| Based on DGS 13 219 |
Tento softvér je poskytovaný "tak ako" je poskytovaný bez záruky. TEAM výslovne odmieta všetky implicitné PGI ZÁRUKY, v ňom boli zahrnuté, ale nie výhradne, implikovaných záruk HLAVA PRÁVA, dostupnosť, výkon, NON-porušenia, PREDAJNOSTI alebo VHODNOSTI PRE KONKRÉTNY ÚČEL. PGI NEZARUČUJE, že softvér alebo dokumentáciu správnosti, presnosti, spoľahlivé alebo iným spôsobom ERROR. RIZIKÁ CELÝ týkajúce sa výsledkov a výkonnosti SOFTWARE je s vami a súvisiace dokumentácie.


Všetky zmeny v PGI 0,9
================================================== =============

- Novinka: zoznam kanálov je súčasný program meno sa objaví vedľa názvu kanála
- Novinka: Exkluzívne PGI Option (OSD menu): VIDEO EXTRA vrstva umožňuje voľbu medzi súčasným video výstup cez HDMI + SCART alebo výrazne lepšiu kvalitu obrazu PiP
- Fix: Nie viac topánka problémy v boxoch sa 2 tunery Conexant
- Oprava: pokrok bar pre aktuálne informácie o programe banner hneď
- Oprava: Nahrávka sa v zozname zoradené zostupne podľa dátumu
- Oprava: informácie, ktoré nie sú aktuálne kanál môžu byť dekódované sa zobrazí až po krátkej chvíli
- Oprava: veľa vylepšení EPG a pozadia hľadanie
- Oprava: nekompatibility medzi spánkom merače v hlavnom menu a pop-up opraviť na tlačidlo OFF
- Oprava: menu "HDD nastavenia" sa objavuje tiež v škatuliach s DVB-C/DVB-T tunery
- Update: Transliterationsalgorithmus pre non-latinské názvy súborov pri nahrávaní mená a kanál zlepšenie
- Oprava: pridaná možnosti pre iptables (niektoré predpisy neboli podporené v 0,8 išiel v predchádzajúcich verziách zatiaľ)
- Oprava: vlastné vzhľady teraz môžu byť použité
- Oprava: SSH démon pracoval (nie je v 0.8.x)
- Povolené nové: on-demand dial-up voľby v pppd
- Oprava: Plugin upload na Internet Explorer už funguje vo WebIf
- Novinka: Ďalšie oddiely na interný pevný disk bude teraz prerušené, rovnako ako externé USB zariadenie (v / mnt / usb / sd *)
- Novinka: MEDIA_CLEAN voľba je späť vo pgi.conf (podrobnosti pozri nižšie)
- Update: usb_modeswitch update na verziu 1.1.4 s aktuálne databázy pre modemy
- Opravil mnoho ďalších drobných, ale veľmi dôležitá chyba

http://www.sat-universe.com/showthread.php?t=182798

_________________
XTREND ET9500 DVBT -DVBS2 tuner E2 , DM7OOOS- GEMINI, IPBOX99 AB E2- IPBOX 91HD -SIFTEAM, ,IPBOX 9000HD - SIFTEAM, 500GB HDD+ DVBT ,DVBS2 tuner , IPBOX 400 - AB E1 ,AB Cryptobox 550HD, Toroidal 90 , 8xLNB Golden Interstar GI202 Twin .


30.srpen 2010 - 22:20
Profil
Registrovaný
Registrovaný

Registrován: 13.říjen 2008 - 18:08
Příspěvky: 9
Příspěvek Re: Image - PGI team
+---------------------+
| PGI v1.1, Kamakiras |
| based on CRD 13759 |
+---------------------+

THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. UNDER NO CIRCUMSTANCES WILL THE PGI SOFTWARE AUTHORS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR EXEMPLARY DAMAGES, DATA LOSS OR HARDWARE MALFUNCTION, ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE UNDER NEGLIGENCE OR EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. BY INSTALLING AND USING THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.

Change List for PGI 1.1
===============================================================================

- New: picons support (see new option in pgi.conf called PICONS below)
- New: allow the power popup when a recording is active, only shows the sleep timer when a recording is active, other options are not shown
- New: added "Default Power Control" option to PVR Settings which applies the selected value to the power control of all instant recordings and timers
- New: fast forward and rewind in the MP3 player; short press goes to next/previous track, longer press does FF/REW, speed increases if the button is held longer
- New: MP3 player can now play unlimited file size, file size was originally limited to the amount of free memory
- New: support for retail 100HD model RCU (the older RCU is possible to enable via pgi.conf OLD_REMOTE option)
- New: Hebrew language added
- Fix: CI modules crashes
- Fix: crash in the settings wizard on first boot
- Fix: initial wizard would run many times even after channel scan and reboot
- Fix: sometimes there would be no video/audio until channel change after stopping the timeshift
- Fix: DiSeqC settings are now reset when adding the next LNB in fixed Sat
- Fix: corrected multiboot for USB/sda options
- Fix: deleting last recording caused wrong OSD information
- Fix: crashes on shutdown while fetching EPG
- Fix: startup scripts corrections for boxes without CI modules
- Fix: changing audio tracks when watching recordings did not always work
- Fix: optimisations in EPG handling and related stability fixes
- Update: updated Web interface, SQLite and BusyBox libraries to the latest versions


Nemáte oprávnění prohlížet přiložené soubory.


20.červenec 2011 - 17:51
Profil
Znalec fóra
Znalec fóra
Uživatelský avatar

Registrován: 09.březen 2008 - 11:31
Příspěvky: 663
Příspěvek Re: Image - PGI team
PGI v1.2, Moguera

Code:

Change List for PGI 1.2
===============================================================================

- Change: EPG database structure changes; after installing this image all existing EPG data will need to be refreshed
- Change: removed EPG 'Multi-TP' scanning flag from web interface; EPG for channels from other TPs is now read automatically
- New: left/right keys allow viewing the detailed EPG info in the epg list (press "EPG", then "i" on a program name and then left/right)
- Fix: power button "turn off with long press" behaviour is back to normal
- Fix: moving channels up and down in the Fav lists is working like it should
- Fix: corrected navigation in Fav list when one or more Fav groups have been deleted using PC-Editor
- Fix: EPG for DVB-T now shows program names properly
- Update: FreeType, mc, iptables, usb_modeswitch updated to the latest versions
- Downgrade: db.dat revision downgraded to R13329 to be compatible with the PC-Editor (purely a label, no data or db structure is affected!)

Special Notes for PGI 1.x
===============================================================================

Besides all of the not so obvious (but countless) bug fixes there are several new major features that we introduce with 1.x releases. The biggest of which is the EPG handling. Most EPG code has been rewritten and the EPG data is now stored in a standard SQLite database. This means several cool things:

1) The EPG data is really persistent (provided you have HDD or USB device to store it) and will not be lost after a reboot
2) It is now possible to insert your own data into EPG database (think XMLTV, although some format conversion would be required)
3) PGI now supports EPG from more "non-standard" providers (see /var/etc/epg/private_epg_info file)
4) There is a new icon on the info banner with 'EPG' logo which appears when the box processes an EPG data stream
5) There is new addition to the web interface that allows you to select the background EPG scanning transponders

As if all of that was not enough, there are many nice improvements to the channel list where you can see lots of additional information for each channel, like the current event / upcoming event (Yellow button), the remaining time till the end of the current or start of the next event as well as the Transponder/Provider information footer. The favourites list has been enhanced too. You can now see the Favourite group name at the top of the list, the channel numbering in EACH favourite group starts with #1 and the same channel in multiple favourite groups is handled better now. Other additions include improved user interface and picons support.

:arrow: http://www.sat-universe.com/redirector. ... 3DAPVN7P04


19.srpen 2011 - 9:47
Profil
Registrovaný
Registrovaný

Registrován: 26.listopad 2007 - 12:59
Příspěvky: 23
Příspěvek Re: Image - PGI team
PGI 1.4 Megalon


Code:

Change List for PGI 1.4
================================================== =============================

- New: new recordings list with many more rows, better layout and navigation, information about free HDD space
- New: new media player libraries that allow better media playback (recordings and media player)
- New: new navigation concept for recordings/video files playback using numeric keys:
0 - jump to the beginning
1/4/7 - jump back 1/5/10 minutes
3/6/9 - jump forward 1/5/10 minutes
2/5/8 - jump to 25% / 50% / 75% of the file
The time interval for 1,3,4,6,7,9 can be changed (see FFRW option pgi.conf below)
- New: enabled direct switching between favourite groups using yellow and blue buttons while in favourite channel list mode
- New: it is now possible to cycle through Aspect Ratio modes with one colour button (can be set via the web interface)
- New: EPG database can retain past events (10 hours back) which can be viewed in EPG list (see new PGI option)
- New: string matching in EPG database is now case insensitive for Latin and Cyrillic based characters (for searching EPG events)
- Fix: correct aspect ratio is set automatically during media files playback with media player
- Fix: cooling fan behaviour when resuming from standby has been fixed
- Fix: corrected behaviour that allowed accidental switching of parental locked channel when changing channels too quickly
- Fix: pressing the Recall button at least 3 times without opening the channel list caused problems in favourites navigation
- Fix: EPG background scanning time was reset to 0 if settings were saved without editing the time
- Fix: corrected some EPG storing behaviour which was affected by DST (Summer Time)
- Fix: channel scanning does not stop forever on some transponders during full scan of a satellite
- Fix: tuner signal is not "disappearing" after scanning a transponder on newly configured satellite (under certain conditions)
- Fix: multiple bugfixes for the satellites and transponders editing interface
- Fix: usb_modeswitch/scripting improvements for initialising already switched USB 3G modems
- Change: Persistent EPG database maximum size has been increased to 64MB (wasn't enough for some demanding users)
- Change: DEBUG option in pgi.conf has 3 values now: "yes", "no" and "max" (see pgi.conf options below)
- Update: busybox, sqlite, e2fsprogs, mc, usb_modeswitch, vsftpd, dropbear, freetype, iptables, transponder DB
- Files: included two Handbrake presets (*.plist) to convert almost any video file into an MKV that is fully compatible with the media player ( http://handbrake.fr )
============


Nemáte oprávnění prohlížet přiložené soubory.


25.srpen 2012 - 7:10
Profil
Pokročilý
Pokročilý

Registrován: 26.prosinec 2006 - 12:06
Příspěvky: 271
Příspěvek Re: Image - PGI team
PGI 1.5, Baragon Auf diesen Beitrag antworten Zitatantwort auf diesen Beitrag erstellen Diesen Beitrag editieren/löschen Diesen Beitrag einem Moderator melden Zum Anfang der Seite springen
Änderungen in PGI 1.5
=================================================================
- Fix: EPG in der einspaltigen Kanalliste erschien nicht sofort
- Fix: Wenn eine Aufnahme auf einem Kanal endet, während man im Timeshift ist, bleibt das Bild schwarz
- Fix: Der Sleep-Timer konnte nicht mehr deaktiviert werden, wenn er einmal eingeschaltet wurde
- Update: Busybox und Transponderdatenbank upgedatet

je verze USB i Flash

Flash

:arrow: PGI-9000-v1.5.zip

_________________
IPBox 9000HD 2xS2_Conexant_Inverto Black Ultra Twin
pgi 1.5+USB-PKT_Nebula1+Harp+Hyperion


13.srpen 2013 - 20:20
Profil
Moderátor
Moderátor

Registrován: 06.listopad 2007 - 21:45
Příspěvky: 642
Bydliště: Ubuntu 12.04
Příspěvek Re: Image - PGI team
Change List for PGI Final
===============================================================================

- Fix: WiFi USB adapters initialisation got accidentally broken in PGI 1.5
- Fix: USB flash was not recognised in media player file browser if it was a sole device connected to receiver (no HDD and no NFS)
- Fix: During channel scan the total transponder count would increase if there was no signal on a currently scanned transponder
- Fix: LNB settings had last option "Sequence Repeat" missing when LNB was being set up for the very first time
- New: Added script for downloading the latest clean db.dat (with the updated transponders list) from the Internet (will clear all channels and relevant settings if downloaded!)
- Update: WiFi drivers now include new device IDs: 2001:3C15 for RT2870 and 2001:3C1B for RT3070 (operation depends on a particular device and is not guaranteed)
- Update: busybox, dosfstools, dropbear, e2fsprogs, freetype, fribidi, iptables, mc, sqlite, usb_modeswitch and satellite/transponder DB

Flash
:arrow: PGI-FINAL-RC2

USB
:arrow: PGI-FINAL-RC2

_________________
Na otazky pouzivajte forum a nie SS !!!

IPBOX 91HD, IPBOX9000, Dreambox 500S, ABIpbox Prismcube Ruby, Multibeam 85, 23,5E-19,2E-13E-1W, SG-2100


08.duben 2014 - 18:00
Profil Zobrazit autorovy stránky
Zobrazit příspěvky za předchozí:  Seřadit podle  
Odpovědět na téma   [ Příspěvků: 16 ] 

Kdo je online

Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 0 návštevníků


Nemůžete zakládat nová témata v tomto fóru
Nemůžete odpovídat v tomto fóru
Nemůžete upravovat své příspěvky v tomto fóru
Nemůžete mazat své příspěvky v tomto fóru
Nemůžete přikládat soubory v tomto fóru

Hledat:
Přejít na:  



Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.
Český překlad – phpBB.cz